S500 3K Rearview Dashcam

The procedure for this model is the same as those for others available on the market:1. Set the connector near the rearview mirror and route the power cable inside the vehicle. This device comes with a standard cigarette lighter plug power supply cable and supports the optional 70mai parking surveillance cable (Model number: 70mai Hardwire Kit UP02) as the power source.2. It is recommended that the vehicle rear camera be installed above the license plate frame. Ensure that the reverse gear detection cable is properly connected to the reverse light signal cable of the vehicle when installing the rear camera. Set up the signal cable and route the connector near the internal rearview mirror of the vehicle.3. Bind the device to the vehicle's built-in internal rearview mirror, and then connect the power cable and signal cable of the rear camera.4. Turn on the device by starting the vehicle. After reading the beginner's guide, observe the real-time screen display. In addition to the pitch angle of the front camera and the rear camera, you can also make adjustments to the angle and directions of the device. Using the touch screen, you can adjust the position of the mirror image to obtain the best view.Note! Installation of the rearview mirror involves the disassembly of the car If you are not experienced with hands-on installation, please seek assistance from a professional at an automotive repair and maintenance store to prevent potential damage to your vehicle.

The built-in front camera of this rearview mirror can be pulled to the left (the direction of pulling described here is under the condition that the mirror is facing you), so as to resolve the issue of conflicting position with the original vehicle's interior rearview mirror. In addition, the orientation of the built-in front camera can be manually adjusted for the best recording view in your vehicle.

No, it is not necessary. This rearview mirror is bound to the original interior rearview mirror of the vehicle.Note: The official installation of this rearview mirror does not support the use of an alternative bracket after removing the original interior rearview mirror of the vehicle. If the original interior rearview mirror bracket is loose, and the rearview mirror often droops when installed in the bundle mounting method, you may opt for a third-party interior rearview mirror replacement bracket that is suitable for your vehicle. You may then remove the interior rearview mirror before installing this rearview mirror.

If you have a third-party interior rearview mirror replacement bracket that fits your vehicle, you may replace the interior rearview mirror with this model after removing it from the vehicle. Apart from providing a live feed from the rear camera, this device can also function as an optical interior rearview mirror when the screen is turned off.